Getting a fresh coat of paint on your walls can transform a room, but a stray drip or splash on your beautiful laminate can feel like a disaster. Whether you’ve just noticed a wet splash, or you’ve discovered a dried paint from a previous DIY session, don’t panic. Laminate is surprisingly resilient if you use the right techniques.
At Funky Flooring, we want your floors to look as good as the day they were installed. Here is our expert guide on how to safely remove paint from laminate floor.
- First Steps: Assess the Paint Type
- How to Remove wet Paint from Laminate Floor
- How to Remove Dried Paint from Laminate Floor
- How to Get Gloss Paint off Laminate Flooring
- Using Solvents Safely
- Dealing with Large Spills
- What Not to Use on Laminate Flooring
- How to Remove Paint from Laminate: FAQs
- Summary Checklist for Success
First Steps: Assess the Paint Type
Before you start, try to identify the culprit. Water based paints (latex or acrylic) are much easier to handle and usually only require a bit of moisture and patience.
Oil-based paints are more stubborn and may require a specific solvent.
Top tip: always test any cleaning solution on a small, inconspicuous area first – like under a radiator or inside a cupboard – to ensure it doesn’t damage the laminate’s wear layer.

How to Remove Wet Paint from Laminate Floor
If the paint is still wet, you’re in luck! Simply grab a damp paper towel or a soft microfibre cloth and wipe it up immediately. Avoid spreading the paint further; instead, scoop the paint towards the centre of the spill.
For slightly tacky paint that’s on its way to drying, a drop of dish soap mixed with warm water is often enough to remove paint from laminate floor surfaces without the need for harsh chemicals. Once the paint is gone, dry the area thoroughly. Never leave standing water on the joints.
How to Remove Dried Paint from Laminate Floor
If you find a dried small patch of paint, your first instinct might be to reach for a metal scraper. Stop! Metal can easily gouge the surface.
To safely learn how to get paint off of laminate floors when the paint has dried:
- Use a plastic putty knife or even the edge of an old credit card.
- Carefully apply pressure at the base of the paint drip.
- Often, the paint will simply pop off the smooth laminate surface because it hasn’t been able to bond with the non-porous wear layer.
How to Get Gloss Paint off Laminate Flooring
Gloss paint is oil-based (or a tough water-based acrylic gloss), so it grips harder than emulsion and won’t simply wipe away once it’s dry. Here’s the safest way to shift it:
- Soften it first. Hold a hairdryer on a warm setting a few centimetres above the drip for 20–30 seconds. Gentle heat softens the gloss without harming the laminate.
- Lift with plastic. Slide a plastic scraper or old bank card under the edge of the drip and ease it up, working from the outside in.
- Dissolve what’s left. Dab a little white spirit (for oil-based gloss) or rubbing alcohol (for water-based gloss) onto a cloth, not straight onto the floor, and rub the residue gently.
- Rinse and dry. Wipe the area with a barely damp cloth, then dry it straight away so no liquid sits in the joints.
Always test white spirit on a hidden spot first, and keep the room well ventilated.
Using Solvents Safely
For tougher, dried-on stains or oil-based splatters, you may need something stronger. Rubbing alcohol (isopropyl alcohol) or a dedicated floor cleaner is your best bet.
- Apply a small amount of rubbing alcohol to a clean cloth.
- Rub the paint spot gently until it begins to dissolve.
- Wipe away the residue with a damp cloth and dry immediately.
Avoid using undiluted bleach or abrasive scouring pads, as these can permanently dull the finish of your floor.
Dealing with Large Spills
If you’ve had a major paint spill and a large area is covered, work in small sections. Focus on one patch at a time so that the cleaning solution doesn’t sit on the floor for too long. If the paint has seeped into the grooves between laminate planks or tiles, you may need a soft-bristled toothbrush to gently agitate the paint out of the texture.
What Not to Use on Laminate Flooring
Some common DIY fixes do more harm than the paint itself. Avoid:
- Acetone or nail-varnish remover: it can melt or cloud the protective wear layer.
- Metal scrapers, blades or steel wool: they’ll scratch through the decorative layer.
- Steam mops: heat and moisture can force their way into the joints and swell the boards (see our guide to using a steam mop on laminate floors).
How to Remove Paint from Laminate: FAQs
Can you get dried emulsion off laminate?
Yes. Emulsion doesn’t bond to laminate’s sealed surface, so softening it with warm soapy water and lifting it with a plastic scraper usually removes it completely.
Does white spirit damage laminate?
No, not if you use it carefully. White spirit is a mild solvent, and it won’t harm laminate’s sealed top layer when used in small amounts. The risk is in the joints: if it seeps between the boards, it can soften the edges and cause swelling. To use it safely, dab a little onto a soft cloth rather than pouring it onto the floor. Then rub the paint gently, wipe the area with a damp cloth and dry it straight away. Test it on a hidden spot first, and keep the room well ventilated.
What if the paint has left a dull patch?
A dull mark usually means the wear layer is scratched rather than stained. Small areas can be disguised with a laminate repair kit. Larger damage may mean replacing the board.
Whether you’re dealing with creaky floors or just a messy DIY project, Funky Flooring is here to help you maintain a home you love. With these top tips on how to remove paint from laminate floors, those paint spots will be a thing of the past!
Summary Checklist for Success: Getting Paint Off Laminate Floors
Learning how to get paint off of laminate floors is all about patience. To keep your floors in top shape:
- Act fast: Wet paint is 90% easier to clean.
- Stay plastic: Never use metal tools or steel wool.
- Keep it dry: Laminate can swell if liquid soaks into the seams.

